25
Revo 18|36 Lathe \ Setup Placement & Unboxing
2. Open the box and remove the parts sent with the lathe including the first leg.
NOTICE!
The legs are
heavy and caution must be exercised. They are cast iron and if dropped they will break.
3. Remove the top packaging and remove the second leg.
4. Cut all four corners with box cutter. Cut the styrofoam around the headstock and the tailstock
5. There is a stop at both ends of the bed. The stop is a safety feature that makes it impossible for the
headstock or tailstock to slide off the end of the bed. Remove the stops to remove the headstock and
tailstock.
NOTICE!
In order to get to the tailstock, you must break away the styrofoam packaging.
