Laguna Tools PFLUX1, Руководство пользователя

Страница: 25 / 53

1.5HP Mobile Dust Cyclone Manual
24
25. Attach the handles to the top and
bottom end on the front panel with the
window display using (4) flat head
Philip bolt, (4) 5/16” x 7/8” flat washers
and (4) 5/16” hex nuts. Note that the
head of the Philip bolt must be inserted
from the handle with the hex nut and
washer on the inside of the drum.
26. Take the Octagon drum front and
back panels and assemble by securing
with (12) M4 x 12mm sheet metal
screws.
27. One the left and right side you will
find three bolt holes. Take the matching
side plate and secure to the outside of
the panel using (6) 1/4” x 1/2” carriage
bolts, (6) 1/4” x 1” flat washers and (6)
1/4” hex nuts. Insert the head of the
carriage bolt from the inside of the
drum with the washers and nuts on the
outside of the drum.
28. Secure the Octagon base panel
to the bottom of the drum using the
remaining M3x6mm Truss head
Phillips flat point screws and M3 cap
nuts. There will be two places you
cannot use the M3x6mm Truss head
Philips flat point screws and M3 cap
nuts. You must use the (2)
M4x12mm sheet metal screws
provided for these two locations.
View of right side of panels