Laguna Tools PFLUX1, Руководство пользователя

Страница: 24 / 53

1.5HP Mobile Dust Cyclone Manual
23
21. Attach the full drum detection
sensor to the opening on the drum
lid located behind the cyclone
funnel. When securing the sensor
make sure the end of the sensor is
shorter than the drum lid rim. If it
extends longer passed the rim,
sensor detection will not function
correctly.
22. Attach the LED light to the drum
lid using (6) M4x10mm Philips Bolt,
(6) 3/16
” flat washers and (6) M4 hex
nuts.
23. Attach the crossbar to the drum
lid and tighten using the two bolts
removed in the previous step. It
does not matter which position you
attach the crossbar.
24. Assemble the Octagon drum.
Locate the drum base panel, (it does
not matter which side faces inside),
and secure the (4) casters using (16)
5/16” x 3/4” hex bolts, (32) 5/16” x 1”
flat washers and (16) 5/16” hex nuts.
Bottom end of sensor
Inner view of
drum lid rim
Crossbar