Laguna Tools PFLUX1 Скачать руководство пользователя | Manualshive

Страница: 2 / 53

background image

1.5HP Mobile Dust Cyclone Manual

1

Thank you for investing in a Laguna Tools PFLUX1 cyclone dust collector. This
cyclone is one of a family of unique machines proudly offered by Laguna Tools.

Every Laguna machine is engineered for years of dependable service. Please feel
free to contact Laguna Tools if you have a question or suggestion. We appreciate

working with you and your choice of a Laguna Tools machine for your shop.

Regards,
Torben Helshoj
President & Founder Laguna Tools

Dealer Machinery Warranty

New woodworking machines sold by Laguna Tools carry a two-year warranty effective from the
date of dealer invoice to consumer. Machines sold through dealers must be registered with
Laguna Tools within 30 days of purchase to be covered by this warranty. Laguna Tools
guarantees all new mach

ine sold to be free of manufacturers’ defective workmanship, parts

and materials. We will repair or replace, without charge, any parts determined by Laguna

Tools, Inc. to be a manufacturer’s defect. We require that the defective item/part be returned to

Laguna Tools with the complaint. An RMA (return merchandise authorization) must be
requested, from Laguna Tools, and included with any and all parts or machines returned to
Laguna Tools for warranty consideration. Any machines returned to Laguna Tools must be
returned with packaging in the same manner in which it was received. If a part or blade is
being returned it must have adequate packaging to ensure no damage is received during
shipping. In the event the item/part is determined to be damaged due to lack of maintenance,
cleaning or misuse/abuse, the customer will be responsible for the cost to replace the
item/part, plus all related shipping charges. This limited warranty does not apply to natural
disasters, acts of terrorism, normal wear and tear, product failure due to lack of maintenance or
cleaning, damage caused by accident, neglect, lack of or inadequate dust collection,
misuse/abuse or damage caused where repair or alterations have been made or attempted by
others.

This manual applies to the PFLUX 1 cyclone dust collector. Enter the model

number and serial number below for quick reference when ordering accessories,
supplies or parts. NOTE: The model and serial number plate can be found on the

Top Upright Support, on the right side near filter and On/Off switch.

Model: ___________

Serial: ___________

Laguna Tools

800-234-1976

www.lagunatools.com

«
1
2
3
4
...
»

Содержание PFLUX1






















































Отзывы:

Нет отзывов

Похожие инструкции для PFLUX1

Бренд: Black & Decker Страницы: 20

Бренд: AQC Страницы: 29

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды