13
CHECK HEIGHT OF CHIPBREAKER
When adjusting the chipbreaker, the correct
position of wooden gauge and 0.1m/m thickness
gauge must be, as shown in (Fig.37). Adjust
process of screw and nut as shown in (Fig. 38).
Adjustments
1. Place wooden gauge and thickness gauge as
shown in (Fig.37)
2. Loosen screw no.1, and nut no.2, turn
screw to the right to make chipbreaker move
upward.
3. Place gauge block under the chipbreaker.
4. Make chipbreaker move downwards slowly
until it touches the top of the gauge block.
5. Once adjusted, turn screw (1) tightly, and
replace the nut (2).
Fig. 37
Fig. 38
