Dake Corporation
1809 Industrial Park Dr
Grand Haven, MI 49417
#972200, 972210, 972220
8
REV#072020
Safety Warnings
BEFORE USE, ALL SAFTEY INSTRUCTIONS MUST BE READ
-
Before the PRESS is used, the instruction manual with this machine must be read and
understood. This manual offers safe operation instructions. Offered below are safety
instructions designed for the press and general safety instructions that apply to most
machinery.
-
As will all machinery there are certain hazards involved with operation and use of the
machine. Using the machine with respect and caution will considerably lessen the possibility
or personal injury. However, if normal safety precautions are overlooked or ignored, personal
injury to the operator may result.
-
This machine was designed for certain applications only. We strongly recommend that this
machine NOT be modified and/or used for any application other than for which it was
designed. If you have any questions relative to its application DO NOT use the machine until
you contact with us and we have advised, you
Practice Safe Operation
•
Keep hands out of point of operation.
•
Never hold part while pressing.
•
Always wear the eye protection.
•
Clamp work piece or brace when pressing.
•
Never place fingers in pin holes.
•
Always use nose piece when pressing. Never press using the end of the ram, damage to ram
or threads can occur.
•
Never use a press that is not fastened securely to the floor or workbench.
•
Always used table pins and accessories furnished with press.
•
Always have firm footing when operating press.
•
Do not use press if parts are damaged or missing. (Hoses, structural components)
This is the safety alert symbol.
When you see this symbol on your press be alert to the
potential for personal injury.
Employer is responsible to perform a hazard/PPE assessment before work activity.
