Instructions manual Nitrogen Compact Booster
7/38
Introduction
1.6
Set-up
The illustration shows a schematic diagram of the principal set-up of the machine
The machine consists of:
Fig. 1-1 Set-up
To fill a gas spring a filling hose, a filling adapter and a filling and control fitting is required.
The parts can be ordered from FIBRO GMBH using the indicated order number.
1
Compressor
2
Start-up valve
3
Filter- and control valve compressed air
4
Nitrogen outlet (labelled with B)
5
Pressure relief valve
6
Nitrogen inlet via bottle hose (labelled with A)
a
Filling and control fitting
Order number
2480.00.32.21
b
Filling adapter M6
Order number
2480.00.32.10
Filling adapter G1/8"
Order number
2480.00.32.11
c
Filling hose
Order number
2480.00.31.02
3
1
2
4
5
6
A
B
