LBXXXA Series USB Powe
™
Product Manual PMA (Power Meter Application)
Revision: 08/02/11
- 45 -
5. Error Messages
Various error windows will appear if there is a hardware or software problem or conflict. Follow the message
instructions to correct the problem.
6. Errata and User Updates
– by date
Subsequent revisions to the user interface and other product changes are listed in this section by date. Periodically
these changes will be incorporated into the body of the manual by revision date (MM/DD/YY). Meanwhile, you can
check for any interim updates by downloading the product manual from the website. The latest software and
documentation are available for download from the company website - see the Contact Information section of this
manual.
Rev Date: 01/07/08
1. Change supplied USB cable length from 3-meter to 2-meter in General Information/Accessories section, pg 6.
2. Add Programming Guide and Quick Start Card to accessories supplied with shipment in same section.
Rev Date: 03/24/08
1. Modify cover page title.
2. Add reference to LB480A Quick Start Guide for the Pulse Profile Application under Measurements Specific to the
LB480A.
Rev Date: 04/15/08
1. Style change to headings.
2. Correct install procedure step 22.
Rev Date: 06/16/08
1. Add check to determine if customer has USB2.0 under USB Considerations section.
2. Add initial install procedure.
Rev Date: 08/19/08
1. Delete VBW specification for PAR (crest factor).
Rev Date: 11/20/08
1. Delete document tracking by alphanumeric revision code and use date only to conform with all other company
documentation.
Rev Date: 02/06/09
1. Combine all sensor models LB4XXA/5XXA in one Product Manual and Quick Start Guide for the Power Meter
Application.
2. Remove specifications and options by model number and replace with data sheet and order guide reference.
3. Update all graphics and feature content to current design (Software Version A.2.5.0.0).
Rev Date: 02/24/09
1. Update graphics for addressing the sensor to current design; add default instrument state.
2. Update measurement and triggering menus and logger setup to current design.
3. Note application may be supplied on USB flash drive in installation section.
Rev Date: 03/27/09
1. Update limits setup and store/recall menu to current design (Software Version 2.6.0.0).
