background image

Lada Niva Driver s Manual

Jason Chapman

Page  21

controlling  the  air  intake  port  cover  is  shifted  to  the  right.  Shifting  the  lever  right  wards
increases the supply  of the  outside  air through the  heater radiator; through the  heater grille if
the  lid is opened  by  means of lever 5, with  lower lever 4 shifted  to  the  right. Turning of the
deflectors changes the direction of the air flow. If the car moves at a low speed,  the  amount of
supplied  air can be increased by  cutting in the  heater fan with  switch  2. The  fan is driven at
the lower speed  on depressing the  lower part  of the  switch  rocker to  the  first  fixed position,
and  at  the  higher  speed  on  depressing  the  rocker  to  the  second  fixed  position.  The  fan  is
switched off by depressing the upper part of the switch rocker as far as if will go.

 Windshield Demisting

To demist the windshield it is enough to blow cold air on it.  For

this  purpose,  shift  lower  lever4  to  the  right  and,  having  closed
the  heater  lid  with  lever  5  turn  air  deflectors  1  so  that  the  air
stream is spread over the greater area of the windshield. To  warm
slightly  the  supplied  air,  shift  upper  lever  3  part  way  to  the
right. When the lever is shifted to the right, coolant delivery from
the engine to the heater radiator is increased.

Heating

To heat the car interior and to demist and defrost the windshield

proceed as follows:

shift levers 3 and 4 to the right;

Fig.  9.  Heating  System  Controls:

1  swivelling  air  deflectors;  2

heater  fan  three  position  switch;

3heater  cock  control  lever;  4  air

intake  port  cover  control  lever;  5

heater  lid  levers

Содержание NIVA 1600





































Отзывы: