Lacunza Tarbes, Инструкция

Страница: 7 / 28

INSTRUCTIONS FOR THE INSTALLER 6
2.
pressure and it is necessary to install a non-
closable outside-air inlet with a section of
at least 90 cm².
2.2.2. Location of the appliance in the
room
Choose a location in the room which
favours good hot-air distribution by
convection and radiation.
2.3. Installation of the appliance
2.3.1. Floor
Make sure that the base can withstand
the total constructed weight of the
appliance and its casing.
The apparatus should not be placed on
combustible material.
2.3.2. Safety distances
Be sure to respect the appliance
installation distances from combustible
materials . Looking at the appliance head-
on:
Distance to
combustible
materials
(mm)
From the right-hand side 550
From the left-hand side 550
From the rear 600
From the front 1400
Bear in mind that it may even be
necessary to protect non-combustible
material in order to prevent breakage,
deformation, etc., as a result of
overheating
if the non-combustible
material is not designed to withstand high
temperatures.
2.3.3. Checks before lighting for the first
time
•
Make sure that the glass is not
broken or damaged.
•
Make sure that the flueway is not
obstructed with packing or loose parts.
•
Check the deflectors are correctly
positioned.
•
Make sure that the airtight joints
on the flue circuit are in perfect
condition.
•
Make sure that the doors close
properly.
•
Make sure that all moving parts are
fitted in place.
2.3.4. Instructions for moving the stove
1. Unpack the stove by removing the
protective packaging.
Figure No.3 - Stove following removal of
the protective packaging