Lacunza INCA100, Инструкция

Страница: 8 / 33

INSTRUCTIONS FOR THE INSTALLER 7
2.
pressure and it is necessary to install a non-
closable outside-air inlet with a section of
at least 90 cm².
2.2.2. Location of the appliance in the
room
Choose a location in the room which
favours good hot-air distribution by
convection and radiation.
The appliance comes with wheels to
help move it into position. In order to
move it, it is necessary to make sure that
the support legs are raised by turning them
with the aid of a spanner. Once in position,
lower the legs until the appliance is at the
desired height.
2.3. Installation of the appliance
2.3.1. Floor
Make sure that the base can withstand
the total constructed weight of the
appliance and its casing.
When the floor surface (base) is
combustible, fit suitable insulation.
2.3.2. Safety distances
Be sure to respect the appliance
installation distances from combustible
materials . Looking at the appliance head-
on:
Distance to
combustible
materials
(mm)
From the right-hand side
200
From the left-hand side
200
From the rear
300
From the front
1000
Bear in mind that it may even be
necessary to protect non-combustible
material in order to prevent breakage,
deformation, etc., as a result of
overheating
if the non-combustible
material is not designed to withstand high
temperatures.
2.3.3. Checks before lighting for the first
time
•
Make sure that the glass is not
broken or damaged.
•
Make sure that the flueway is not
obstructed with packing or loose parts.
•
Make sure that the airtight joints
on the flue circuit are in perfect
condition.
•
Make sure that the doors close
properly.
•
Make sure that all moving parts are
fitted in place.
•
Check that the two deflectors are
fitted properly; the lower deflector has
four positions with which to open or
close the flue to a greater or lesser
extent.
2.3.4. Height adjustment and levelling the
appliance
The appliance must be perfectly level,
horizontally and vertically, both at the
front and on the sides (use a spirit level).
The appliance has adjustable legs with
which to adjust its height.
IMPORTANT! When it is level and
before encasing the appliance, check that
the appliance works properly.
2.3.5. Casing
Make sure that the material around the
appliance is not flammable or likely to
deteriorate as a result of heat (wallpaper,
carpet, plastic-based casing, Silestone,
etc.).
The image below gives an example of
how the appliance can be encased
properly: