Lacunza Clasica 5T, Инструкция, Страница: 9 / 36

INSTRUCTIONS FOR THE INSTALLER 8
2.
2.2.2. Location of the appliance in the
room
Choose a location in the room which
favours good hot-air distribution by
convection and radiation.
2.3. Installation of the appliance
2.3.1. Floor
Make sure that the base can withstand
the total constructed weight of the
appliance and its casing.
When the floor surface (base) is
combustible, fit suitable insulation.
2.3.2. Safety distances
Be sure to respect the appliance
installation distances from combustible
materials . Looking at the appliance head-
on:
Distance to
combustible
materials
(mm)
From the right-hand side
450
From the left-hand side
450
From the rear
650
From the front
1000
From the top surface
750
Bear in mind that it may even be
necessary to protect non-combustible
material in order to prevent breakage,
deformation, etc., as a result of
overheating
if the non-combustible
material is not designed to withstand high
temperatures.
2.3.3. Checks before lighting for the first
time
•
Make sure that the glass/es is/are
not broken or damaged.
•
Make sure that the flueway is not
obstructed with packing or loose parts.
•
Make sure that the airtight joints
on the flue circuit are in perfect condition.
•
Make sure that the doors close
properly.
•
Make sure that all moving parts are
fitted in place.
2.3.4. Height adjustment and levelling the
appliance
The appliance must be perfectly level,
horizontally and vertically, both at the
front and on the sides (use a spirit level).
2.3.5. Casing
Make sure that the material around the
appliance is not flammable or likely to
deteriorate as a result of heat (wallpaper,
carpet, plastic-based casing, Silestone,
etc.).
If the top surface is surrounded by
building material (marble, brick, etc.) as
part of the kitchen stove installation
process, leave a gap of at least 4mm to
allow the top surface to dilate.
Secure the enamelled double sides to
the kitchen stove using the screws
provided.
Figure No.5 - Securing the double sides