12
3.3 Adjusting The Monitor With The Tilt/Swivel Base
The LaCie electron19blueIV Monitor comes with a tilt/swivel base that enables
you to position the monitor with the best angle and tilt for maximum viewing
comfort (see section
3.5 Location Considerations
for more information on
ideal monitor placement).
Screen Position Adjustment
Adjust the tilt and rotation of the
monitor by placing your hands
at opposite sides of the case.
You can adjust the monitor 90°
right or left, 10° up or 5° down,
as shown in Figure 1. Keep your
fingers away from the pivot area
of the tilt/swivel base.
3.4 Installing The LaCie Blue Hood
The LaCie color enhancing hood guarantees the most accurate and consistant
colors on the monitor by reducing the interference of surrounding light, and by
reducing light reflection and shadows. The inside of the hood is made of a
light absorbing plastic for the best possible result.
1) Remove the white covers on the two Velcro tabs from the center panel of
the hood. Do not remove the tape covers from the Velcro on the side panels.
Do not separate the Velcro tabs, as it will make final installation more difficult.
2) Adhere the center panel of the hood to the top of the monitor. The rear of
the hood should be placed approximately 4 cm (1.5 inches) from the front
edge of the monitor, aligned with the junction between the two parts of the
monitor casing, creating an overhang of about 15 cm (6 inches).
3) Repeat the process in 1) for the side panels. Remove the white tape covers
on the Velcro tabs from the side panels. Align the back edge of the monitor to
follow the curve on the side of the monitor.
4) Once all the Velcro tabs are adhered to the monitor, gently remove the
hood by lifting one side, then the other and then the top panel. Firmly press
the Velcro tabs onto the monitor for a better bond and reattach the hood. You
should always keep the hood on for the best colors and eye comfort possible.
