11
4) Attach the 15-pin mini D-SUB end of the captive signal cable to the Mac
cable adapter on the computer. Tighten all the screws.
5) Connect the other end of the signal cable to the connector on the back of
the monitor.
6) Connect the female end of the power cord to the monitor and the male end
to a power outlet.
7) Turn on the monitor and the computer.
3.2.2 PC Users
1) Turn off the power to your computer.
2) If you do not already have a graphics card installed, you will need to have
one installed prior to installation. Please refer to your graphics card
installation manual for more information.
3) Connect the 15-pin mini
D-SUB connector of the
signal cable to the connector
of the display card in your
system. Tighten all the
screws.
4) Connect the other end of the signal cable to the connector on the back of
the monitor.
5) Connect the female end of the power cord to the monitor and the male end
to a power outlet.
6) Turn on the monitor and the computer.
