background image

1. Introduction

page 9

LaCie 119 Monitor

User’s Manual

1. Introduction

Thank you for choosing the LaCie 119 monitor. We hope
you'll be pleased by your purchase. Your LaCie 119
presents an ideal combination of high 1000:1 contrast
and 250 cd/m2 maximum brightness for your viewing
comfort. If possible, and for best viewing conditions we
recommend that you use your monitor in its native 1280
x 1024 resolution.

If you are planning on calibrating your monitor, please
refer to the OSD controls presented in this User’s
Manual. If you haven't invested in a calibration tool yet,
LaCie blue eye 2, a combination of hardware calibration
software and colorimeter may also be of interest to you.
Please refer to our website at www.lacie.com for details.

Specifications

Diagonal size :

19’’ / 48 cm

Resolution :

1280x1024 (SXGA) @ 75 Hz (Analog)1280x1024 (SXGA) @ 60 Hz (Digital)

Pixel Pitch :

0.294

Active Area :

376.3 x 301 mm

Colors 

: 16.7 Million

Contrast Ratio :

1000:1

Brightness : 

250 cd/m2

Response Time :

20 ms

Viewing Angles :

170° / 170°

Technology :

Vertical Alignment TFT

Connections :

1 x DVI-D, 1 x VGA D-Sub

Power saving mode :

less than 2W

Содержание 130705 - 119 With LaFrame























Отзывы: