17
uScope main window
3.1
X-Y Traverse
The position indicators to the right and below the video display indicate the position of the
x-y
traverse and can be used to move the traverse. The X-Y traverse has a motion range of 50 mm
by 75 mm.
The traverse can also be adjusted using the keyboard arrow keys. Holding down the shift-key
while using the arrow keys slows the traverse to allow fine adjustment.
For certain applications it may be useful to temporarily reduce the motion limits of the x, y, or
focus. The motion range can be reduced by selecting
SVM>Motion Limits…
from the main menu.
Modification of these limits may be useful if you have installed a device on the SVM (i.e. a chip
holder) that may interfere with the stage at its preset limits.
3.2
Focus
The focus indicator slider bar is located at the top of the main window. The slider bar can be
used to adjust the focus, while the + and
–
buttons to the left of the bar are used for fine
adjustment. The focus can also be adjusted using the Page Up and Page Down keys on the
keyboard.
