10
2.5
Front panel controls
Many SVM340 features are accessible through the uScope software. You can also, however,
access some important functions directly from the front panel.
Power
The power button and LED are located in the upper left corner of the front panel.
When the power is turned on, the LED will flash green and red while the system
runs its initial tests, and turn green when the tests have passed.
Site-Light These buttons toggle between SITE mode and LIGHT mode. When the SITE
button is lit, the four storage buttons A
–
D represent four different stored
positions, and the keypad controls the traverse movements. The focus
buttons move the objective up and down for focusing.
When the LIGHT button is lit, buttons A
–
D represent the four LED channels,
and the keypad up and down buttons control the intensity of the LED banks
selected by the A
–
D buttons.
A
–
D
In SITE mode
, the buttons A
–
D represent four stored settings of the
traverse and focus positions and LED intensities.
To recall a stored position, select SITE mode and press and release a storage
button. The traverse will move to the location and set the four LED
intensities to the values of the stored settings.
Keypad
Preset
selectors
SITE/LIGHT
Toggle buttons
Lock indicator
LED
Focus
control