LABORIE Solar Blue, Руководство по обслуживанию и установке

Страница: 36 / 198

© 2008
– 2020 by MMS B.V.
35
If you want to add a Bluetooth module to perform a test in the Hardware test
program, choose
Bluetooth > Bluetooth Registration from the menu. Follow
the instructions on the screen to register a module in the Hardware test
program.
NOTE Bluetooth modules which are only registered in the Hardware
test program are not available in the measurement program.
To perform the investigation, the device must be registered in
the measurement program.
3.5.3 Hardware test Solar (USB)
In the database program, choose Utilities > Hardware test Solar (USB) to
test the modules, connected with USB cables.
To test the Solar Blue module, make sure that the Solar Blue module is
connected to the computer via a USB cable.
To test the flowmeter, make sure that the following conditions are met:

the Solar Blue module is connected to the computer via a USB cable,

the Solar Blue module is powered by the external power adapter, and

(for flowmeter): the module is connected to the Solar Blue module with a
digital cable to one of the MMS-bus ports of the Solar Blue module.
When the Hardware Test program (USB) is started, the screen shows all
modules connected with USB cables.