LABORIE PrimeSight UNITY UVP-9000, Руководство пользователя

Страница: 63 / 72

The PrimeSight UNITY 9000 Video Processor User Manual 55
9.3 SHIPPING TO LABORIE OR DISTRIBUTOR
If the PrimeSight UNITY 9000 Video Processor has been used in a clinical
setting, disinfect all system components before shipping as described in
Chapter 7,
Maintenance and Storage . Shipping contaminated equipment
presents an acute infection-control risk for those handling the Video
Processor, both during shipping and at LABORIE or authorized repair
facility.
If the PrimeSight UNITY 9000 Video Processor has been used in a clinical
setting but cannot be disinfected before shipping, place a red biohazard
label on the shipping container to indicate that the contents are
contaminated, in accordance with OSHA standards 29 CFR 1910.1030.
Observe the following precautions before shipping the Video Processor:
The Video Processor or any other LABORIE equipment must be shipped in the original box with
the original protective foam caps to prevent damage during shipment. If the original packaging is
not available at the time of shipping, contact your regional distributor or LABORIE Customer Care
Department to obtain replacement packaging.
The customer will be responsible for the cost of all
replacement materials.
Regardless of warranty status, all shipping charges to and from an authorized LABORIE facility are
the responsibility of the customer.
NOTE: The customer will be contacted and advised of the estimated repair costs. Repairs
will not begin on any equipment until authorization or a purchase order has been issued
indicating approval of the charges.