LABORIE PrimeSight UNITY UVP-9000, Руководство пользователя

Страница: 13 / 72

The PrimeSight UNITY 9000 Video Processor User Manual 5
2 - Important Information
2.3 USER QUALIFICATIONS
This equipment should only be used in a medical facility by or under the supervision of a physician
trained in endoscopic procedures. Do not use the Processor in any other locations or for any other
purposes than its intended application.
Only use the equipment according to the instructions and under the operating conditions
described in this User Manual. Failure to do so could result in compromised safety, equipment
malfunction and/or instrument damage.
If training assistance is desired from either the manufacturer or a local distributor, please contact
LABORIE Customer Care.
2.4 MAINTENANCE AND REPAIR
The UNITY 9000 contains no user-serviceable parts (except for fuse replacement); never attempt to
modify or repair the Processor. Doing so may cause further equipment damage and/or compromise
patient safety if the Processor is subsequently used in a procedure. The Processor may only be
serviced or repaired at an authorized LABORIE facility.
In addition to thoroughly inspecting the Processor before each procedure, periodic inspections
should be performed to determine if there is wear or damage that requires attention.
Refer to Chapter 7, Maintenance and Storage for procedures on maintaining the PrimeSight UNITY
9000 Video Processor.
Refer to Chapter 9, Warranty and Service for information on returning the PrimeSight UNITY 9000
Video Processor to LABORIE for service.
2.5 SIGNAL WORDS
Information included in this manual which alerts users to the possibility of patient injury and/
or equipment damage is signified by the Warning and Caution symbols below. Notes are also
included in the manual to supply additional helpful information to users.
Alerts the user to situations which, if not avoided, could result in death or
serious injury.
Alerts the user to situations which, if not avoided, could result in moderate
or minor injury to the user or patient. It is also used to alert the user to
conditions and actions that could cause equipment damage.
NOTE: Indicates additional helpful information.