solutions without chemical ingredients at a temperature of up to 30
°C.
Do not use aggressive detergents, such as organic solvents, cleaning sand, cleaning pastes, developing steams and
strong alkali cleaning detergents.
NOTIFICATION:
Ensure careful cleaning of shading lamellas and textiles to prevent jamming or other damage.
Fabric with a steaming layer must not be cleaned with water
– the layer can be damaged. When cleaning windows,
set the product into a position to prevent damage and any interference while cleaning. Protect the product against dirtying
during reconstruction and painting.
DESCRIPTION OF THE CONTROL USING THE KNOB:
The blind is lifted by drawing the lower bar of the blind. The blind is lowered by pressure on the lower bar and is lifted in an
upward direction. The lamellas are tilted using the knob
– by turning to the left and the right.
The blind is controlled in difficult to access places using the bar where the end with the adapter is inserted into the hole in
the bar (lifting and lowering) or in the button (tilting of lamella).
Description of the control by using the slider:
The blind is lifted by drawing the lower bar of the blind. The blind is lowered by pressure on the lower bar and is lifted in an
upward direction. Tilt the lamellas using the slider located in the side leading bar of the blind by moving in the upward and
downward directions.
The blind is controlled in diff cult to access places using the bar where the end with the adapter is inserted into the hole in
the bar (lifting and lowering) or in the button (tilting of lamella).
2. MAINTENANCE
Manual setting
The product does not require any extraordinary maintenance or lubrication of control mechanisms.
In the case of dirtying (dust), regularly use a fi ne brush or a slightly adjusted manual vacuum cleaner.
During general cleaning, regularly wipe the surface with a cloth or a wet soft textile or sponge. Only use soap
