PixelPro
3.2
Instruction
Manual
R
45
Paintbrush:
Draws a freehand curve on the preview screen.
Arrow:
Draws a pointer arrow with two clicks.
Text:
Adds a text note to the image.
Select:
Graphics or text notes drawn on the image can be selected. When the cursor,
moved to the vicinity of graphics or text, changes from
to
, the element can be
dragged to a new position or deleted by pressing [Delete].
Delete:
Deletes drawn or measured graphics.
Undelete:
Undo the last delete operation.
Clear All:
Removes all drawn and measured graphics or text on the current layer.
Combine:
When saving the image, the drawn or measured graphics or text will be baked
onto the image. Otherwise, measured graphics or texts remain editable when the image
is opened again. The default state of this function is active.
Data Property:
Each graphic has a corresponding data type, such as
length, angle, slope,
diameter, perimeter, area, etc
. Graphics drawn after checking and their associated
information will appear on pictures at the same time.
Right click to toggle between drawing and selection modes.
When the mouse is in the
state, scroll the wheel to zoom in/out, and hold down
the mouse wheel button to drag the picture.
When the mouse is in the
state, scroll the wheel to zoom in/out, hold down the
mouse wheel button on a graphic to drag the graphic, and hold down the mouse wheel
button on the endpoint of a graphic
to edit the graphic.
All drawing and measuring graphic data information will be saved in the measurement
table. Click
[Export to Excel]
or
[Export to TXT]
to save data information in EXCEL form
format or TXT document format. Click
[Copy]
to copy the entire table to the clipboard
for pasting elsewhere.
5.2
Calibration
The calibration ruler converts the number of pixels into meaningful measurement units,
and supports conversion units of nm, µm, mm, inch, 1/10 inch, 1/100 inch, and 1/1000
