4.3.
Alarm settings
4.3.1. Timed message interval (TXD)
The idOil unit can be timed to send information on system status and possible alarms to the
recipients’ phone numbers. The user can define interval in days and the specific time of the
message.
The timed alarm information message is described in the section “Alarm status query”.
This setting can also be entered via the idOil unit’s browser user interface.
The command format for setting the timed message interval is as follows:
TXD <nnn> <hh:mm>
Field legend
TXD
Timed message interval command.
<nnn>
The timed message interval in days.
<hh:mm>
The time of the message – hours (hh) and
minutes (mm) – separated with a colon.
The factory default for the interval and time is 0 00:00. When the interval is set to 0, the
timed message is not in use.
Example 1
Send the following message to the idOil device:
TXD 1 12:00
Device response:
TXD <device name> 1 12:00
The device sends a timed message every day at 12:00.
Example 2
Switching off the timed message
Send the following message to the idOil device:
TXD 0 00:00
Device response:
TXD <device name> 0
4.3.2. Service alarm interval (SI)
This setting can also be entered via the idOil unit’s browser user interface.
The format of the service alarm interval is as follows:
SI <interval>
Installation and Operating Instructions | idOil-30 3G, idOil-30 Battery 3G
10/19
DOC001696-EN-1
