Label ETERNA 90 EASY, Руководство по установке

Страница: 8 / 48

5 - COVERING CASING
The casing of the ETERNA 90 EASY automation
is provided with two fall prevention
cables (A) designed to ensure its stability in the opening
position (F ig .1).
Position the casing on the automation, hooking the top part
with the transom FIG.3 and close it pushing downwards.
In order to remove the casing from the automation, remove
the fastening screws, press the bottom of the casing
toward the automation and at the same time push
downwards the inner part of the casing rotating it in the
direction of the arrow (FIG.5).
Once removed from the transom, the casing will be
suspended by means of the fall prevention cables.
In order to remove fully the casing from the automation,
extract the end of each fall prevention cable from its seat in
the casing.
Manually support the casing before extracting the cables.
FIG.5
FIG.1
A
1
2
2
25°
FIG.3
FIG.4
Fasten the casing by means of the screws on the side
panels FIG.4.
Insert the two fall prevention cables in the seats located on
the transom and on the casing with the ends facing the
same direction. (FIG.2).
FIG.2
25°
8