Labconco Capture BT 31700-00, Руководство пользователя

Страница: 32 / 97

32
Screen Layout & Information
Once the chamber is ready for operation, familiarize yourself with the display screen
layout and where key information is located. See Fig. 6-4.
Humidifier Water Fill
If the Water Bottle that supplies the Humidifier has not already been filled from the
Chamber Operational Checks in Section 4, fill the Water Bottle with approximately 500
mL of water. RO filtered or distilled water are recommended. Replace the Water Bottle
in the holder and make sure the water line hose goes back through the hole in the
Water Bottle Lid and the end of the hose reaches to the bottom of the Water Bottle.
When
the unit’s Power Switch is turned on, you will hear a pump turn on if the humidifier
needs water. This pump delivers water to the Humidifier from the Water Bottle. The
pump will run until the proper amount of Distilled Water is delivered to the Humidifier.
Figure 6-4
TIME DISPLAY
MENU/FUNCTION
MENU/FUNCTION
OPTIONS
SELECTION ICON
CARBON FILTER
CYCLE LIFE
DISPLAYS:
CYCLES RAN /
FILTER LIFE
REPLACE MAIN
CARBON FILTER
LOW WATER
MAIN DOOR OPEN
CA DOOR OPEN
ALERT ICONS:
IMPORTANT
Verify the valve behind
the Water Bottle is
flipped to the down
position, which is
NORMAL FILL, as
shown to the right.
VALVE
WATER
BOTTLE