Shock Dyno
Version: 1.0.23241
Page 47/62
9.10.
Additional Test Options
In the New Project and Open project areas, additional test options are available. Those options can
be accessed by expanding the “Graph Settings” area at the bottom right side of the screen or by
clicking a right-mouse button on the “Recent Tests” list.
Figure 38
•
Recalibrate – repeats the exact calibration that has been done upon creating a new project.
When re-calibrating, the Dyno will measure the preload force and update the zero-tare
value, which could shift after the damper gets warmer from testing
•
Avg. Velocity Shift – shifts force axis to 0 or leaves it untouched when viewing a Force vs
Avg. Velocity graph.
•
Velocity Modifier – changes how velocity is presented in the graphs, either as a positive or
negative speed for a rebound cycle.
•
PVP Interpolation – enables Peak Velocity graph interpolation, which fits the curve with
new data points and smoothens the line.
•
Live PVP Option – enables a Peak Velocity graph preview during a live test.
•
Live Test Compare – if checked, an additional selected graph will be displayed in the
background during a live test.
