Section B.
Installation Instructions
1. Discharge pump installation -
The La Rose
discharge pump may be connected to an existing
sink drain or floor drain. It can also pump up to 20
ft high, but this will increase the length of the drain
time. The drain connection is at the rear of the
unit by a 1/2” fitting.
2. Gravity drain installation -
The La Rose uses
a standard gravity drain. A floor drain is the
recommended installation. Connection is via a
1/2” pipe. A P-Trap is supplied.
3. Water Supply Connections –
The La Rose hot
and cold connections are located at the rear of the
unit. 1/2” Fittings.
4. Electrical installation -
Have a qualified
licensed electrician to install the wiring according
to local codes. The CleanJets are 1/5 hp, 120V, 15
AMP 60OHZ. A GFI protected circuit must be used
to supply power to the unit. The roller back
massage chair uses a 115V supply.
5. Secure the base -
The La Rose base should
be anchored securely to the floor. The base may
be anchored through the opening in the back of
the base wherever access is convenient for the
installer.
WARNING:
FAILURE TO ANCHOR THE BASE MAY RESULT
IN PERSONAL INJURY OR DAMAGE TO THE
UNIT. DAMAGE AS A RESULT WILL VOID THE
WARRANTY.
3
