Manual
Barista Milk Mate 1.5
© La Cultura Del Caffè GesmbH
04.09.2015
Page 20 | 36
3.9.5
Buttons Portions
By using this menu each one of the 4 possible portions may be
set.
Press one of the buttons to set its portion.
Each portion consists of 2 sequences. The sequences may follow
each other sequentially or may run simultaneously. Every
sequence opens its valves for the time set.
Usually the portioning for each sequence is done by first
choosing the valves for this sequence (they are marked red
then). Then press & hold the button
to coarsely set the
time for this sequence. Then the time may further be adjusted
by using the buttons "+" or "-".
If the function "1=2" is set (marked red), both sequences will
start simultaneously. If "1=2" is inactive, at first sequence 1 is
started, afterwards sequence 2 is started.
By pressing the "Test" button, the actual portion is dispensed for
verification purposes.
Confirm and store the new portion using the button "√" or
cancel using the button "X" in the title bar.
The example shown in the picture at the right hand side means
that the sequences are started simultaneously ("1=2" is
activated), so valve V1 and valve V2 are opened at once. After
1,00s V1 is closed, 0,30s later V2 is also closed (it is opened for
1,30s overall).
Manual portion:
If the valve time of both sequences is set to 0,00s and the
according button is not inactive, the dispensing lasts as long as
the button at the desktop screen is pressed. The according
valves may be set either in sequence 1 or sequence 2
Note:
If during portioning via the button
no valve is chosen
(neither area "V1" nor area "V2" activated), the portioning can
be done without opening a valve. In this case at first the time is
set and afterwards the according valves for each sequence are
chosen.
