background image

Model: WT-3181   www.lacrossetechnology.com/support      

Page | 6

  

Product Registration:   

www.lacrossetechnology.com/support/register  
 

Online Product Support:  

www.lacrossetechnology.com/support  

 

FCC Statement 

 

This equipment has been tested and found to comply with the limits for a Class B 
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful interference in a residential 
installation. This equipment generates, uses and can radiate radio frequency 
energy and, if not installed and used in accordance with the instructions, may 
cause harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. If this 
equipment does cause harmful interference to radio or television reception, which 
can be determined by turning the equipment off and on, the user is encouraged 
to try to correct the interference by one or more of the following measures:  

 

Reorient or relocate the receiving antenna. 

 

Increase the separation between the equipment and receiver.  

 

Connect the equipment into an outlet on a circuit different from that to which 
the receiver is connected.  

 

Consult the dealer or an experienced radio/TV technician for help.  

 
This device must not be co-located or operating in conjunction with any other 
antenna or transmitter. 

Operation is subject to the following two conditions:  

(1) this device may not cause harmful interference, and  
(2) this device must accept any interference received, including 
interference that may cause undesired operation. 

 

Caution! 

 

The manufacturer is not responsible for any radio or TV interference caused by 
unauthorized modifications to this equipment. Such modifications could void the 
user authority to operate the equipment. 
 
All rights reserved. This manual may not be reproduced in any form, even in part, 
or duplicated or processed using electronic, mechanical or chemical process 
without the written permission of the publisher. 
This booklet may contain errors or misprints. The information it contains is 
regularly checked and corrections are included in subsequent editions. We 
disclaim any responsibility for any technical error or printing error, or their 
consequences. 
All trademarks and patents are recognized. 

 

Содержание WT-3181







Отзывы: