Model: WT-3181 www.lacrossetechnology.com/support
Page | 2
Central Time
The antenna is available for signal reception when the front or back
of the clock faces Colorado.
Outdoor:
Choose a location with an overhang to protect the clock
from the overhead sun or standing snow or rain.
A shaded location will prevent inaccurate temperature readings.
Mount the clock on a wall with the hanging hole on the back of the
clock. Be sure the battery cover is on snug.
Manual Set Time
On rare occasions in certain areas, the clock may not be able to receive
the radio controlled time signal due to the strength of the signal or the
geographic location.
In this case, the clock can be set manually and used as a regular quartz
wall clock.
Note:
Allow up to five nights for the clock to receive the WWVB signal
before
manually setting the time.
Set the clock manually:
1.
Remove battery for 15 minutes and press the
Manual Set Tab
20
times.
2.
After 15 minutes, insert the battery and allow the clock to spin to
12:00, 4:00 or 8:00.
3.
Hold the
Manual Set Tab
and the hand will spin. Continue holding
until the correct time is achieved.
Note:
You can only set the clock manually for about 2 minutes after
the battery is inserted. If the clock receives the WWVB time signal,
this signal will override manually set time.
Battery
Compartment
1-“AA”
Alkaline
Eastern
Time
DST ON/OFF
Button
Mountain Time
Pacific
Time
Manual
Set Tab
