La Crosse Technology, Ltd
Page 7
5.
Press to confirm and move to the month. The MONTH will show, and Month number
will flash. Tap the
button to change the month.
6.
Press to confirm and move to the date. DATE will show and Date number will flash.
Tap the
button to change the date.
7.
Press to confirm and move to the temperature unit. TEMP will show and ̊F will flash.
Press the
button if you prefer °C (Celsius).
8.
Press to confirm and exit. THANK YOU will show for 2 seconds.
Do I need to unplug the clock to change the time?
•
No. To access the Program Menu, simply hold the button for 3 seconds. The
Greeting will not show. The Greeting will only show when clock is plugged in.
Light Alarm (no sound, just light)
There are 2 time alarms: LIGHT ALARM and SOUND ALARM. The LIGHT alarm and
SOUND alarm may be set to different times or be set to the same time.
LIGHT ALARM:
1.
Hold the
button to enter the Alarm Setting Mode. ALARM and will show and the
Hour will flash. Tap the
button to adjust the hour.
2.
Press the
button. The Minutes will flash. Tap the
button to adjust the
minutes.
3.
Press the
button to confirm and exit.
4.
The alarm is active when set.
Before the alarm time is reached, the Light Cycle will begin to brighten, taking 30
minutes for full brightness. Full brightness will remain until the alarm is turned off. There
are ten frames, to complete the full cycle. Each frame will show for 3 minutes. Once full
brightness (Frame 10) has been reached, it will remain on until the you turn off the alarm.
or
or
or
or
or