10
Pressure (default)
Temperature/Humidity
Rain
Add Extra Sensors:
1. Install batteries into your extra sensor(s).
Note:
For Temp/Humidity sensors, be sure to select different channels (1,2,3)
before you insert batteries.
2. Hold the
EXTRA
button on the station until the Reception Indicator starts
to animate. This will start a search for your Extra Sensors.
3. Your sensor(s) should connect within the next few minutes. Press the
EXTRA
button to cycle through Extra Sensor and Pressure data. The Auto Scroll Icon
will appear when activated.
Delete Extra Sensors:
It’s possible the station will pick up a neighboring sensor. To remove it, press
the
EXTRA
button to view that sensor. And while viewing it, hold the
- (MINUS)
button to delete it.
Purchase Extra Sensors:
Visit
or scan the QR code
to find
and purchase compatible add-on sensors.
Extra Sensor Area
This station can display data for an add-on Rain Gauge as well as up to
three additional Temp & Humidity Sensors. These readings will all appear in
the upper left section of the LCD.
