4 |
P a g e
6.
Press SET to confirm and move to the year. The YEAR will show. 2020 will flash. Press the +
or - button to change the year.
7.
Press SET to confirm and move to the month. The MONTH will show. Month number will
flash. Press the + or - button to change the month.
8.
Press SET to confirm and move to the date. DATE will show. Date number will flash. Press
the + or - button to change the date.
9.
Press SET to confirm and move to Month/Date or Date/Month format. MONTH/DATE will
flash. Press the + or - button to change to DATE/MONTH.
10.
Press SET to confirm and move to the temperature unit. FAHRENHEIT will show. ̊F will flash.
Press the + or - button if you prefer °C (Celsius).
11.
Press SET to confirm and exit. THANK YOU will show for 2 seconds.
Note: After 10 seconds with no button press, station returns to normal time display.
WEEKDAY: HOW DO I CORRECT THE DAY OF THE WEEK?
•
The day of the week will set when the Year, Month, and Date are set. If your day of the
week is incorrect, yet the month and date are correct, please go the
check the YEAR setting.
DOES THIS STATION HAVE 12 HOUR AND 24 HOUR TIME OPTIONS?
•
Yes, you can select 12 hour or 24 hour time format in the
HOW DO I CHANGE THE CALENDAR DISPLAY?
•
Press and release the CALENDAR button to change date display or to not show the
Calendar.
•
Station will stay on selection.
WHY DOESN’T THE TEMPERATURE/HUMIDITY READINGS
ON MY STATION MATCH THE WEATHER REPORT?
•
Your temperature and humidity readings are from your sensor at your location. Your local
reporting station can be miles away so readings will differ.
WHAT DOES A READING OF “HI” OR “LO” MEAN?
•
If your outdoor temperature reading shows “HI” or “LO”, check that your
•
Overpowered or underpowered batteries can cause this reading.
•
If batteries are good, replace the outdoor sensor.
•
If your temperature is fine but your humidity is reading “HI” or “LO” or dashes, your humidity
may be below 10% Relative Humidity. Your sensor does not read below 10% humidity.
