background image

Holder

Hanging holes

Battery cover

LCD1 
display 

LCD2 
display 

Foldable stand 

Foldable stand 

WS-8017U 

ATOMIC CLOCK WITH OUTDOOR  WIRELESS TEMPERATURE

  

Instruction Manual 

 

INTRODUCTION: 

Congratulations on purchasing this state-of-the-art Atomic Clock as an example of superior design 
and engineering. Providing WWVB radio-controlled time, date, time zone, indoor and outdoor 
temperature display,  this innovative clock is ideal for home or office use. Operation of this product is 
simple and straightforward. By reading this operating manual, the user will however receive a better 
understanding of the Atomic Clock together with the optimum benefit of all its features. 

 

FEATURES: 

 

ATOMIC CLOCK: 
 
 
 

 

 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 

  WWVB Radio controlled time with manual time setting 

  12/24 hour time display 

  Time display: hour, minute, second 

  Alarm setting with snooze function 

 Calendar 

display 

  Weekday display (3 languages to choose from: English, French and Spanish) 

  Time zone setting 

  Daylight savings time ON/OFF option (DST) 

  ºC or ºF temperature display selectable  

  Indoor temperature display 

  Outdoor temperature display via 433MHz transmission 

  Wall mount or freestanding 

 

OUTDOOR TEMPERATURE TRANSMITTER: 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

  Remote transmission of outdoor temperature to the Atomic clock by 433 MHz signals 

  Wall mounting case 

 

TO INSTALL AND REPLACE BATTERIES IN THE ATOMIC CLOCK 

The Atomic Clock uses 2 x AA, 1.5V batteries. To install and replace the batteries, please follow the 
steps below:  
1. 

Insert finger or other solid object in the space at the bottom center of the battery compartment 
and lift up to remove the cover. 

2. 

Insert batteries observing the correct polarity (see marking). 

3. 

Replace compartment cover. 

DO NOT SET THE CLOCK. 

 

TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE TRANSMITTER 

The transmitter uses 2 x AA,1.5V batteries. To install and replace the batteries, please follow the 
steps below: 
1. 

Remove the cover. 

2. 

Insert the batteries, observing the correct polarity (see marking). 

3. 

Replace the battery cover on the unit. 

Alkaline batteries are recommended for use in both units. Avoid using rechargable batteries. 

SETTING UP:  

Function keys

Содержание WS-8017U










Отзывы: