WWVB ATOMIC TIME SIGNAL
ALARM
Set Alarm:
1. Hold the ALARM button to enter Alarm Settings.
2. Use the + or - button to adjust values.
3. Press the ALARM button to confirm and move to next item.
Silence a sounding alarm:
Press any button except SNOOZE to silence alarm for 24 hours.
Activate/Deactivate Alarm:
• Press the ALARM button to deactivate or activate the alarm.
• The Bell Icon will show when alarm is active.
Snooze:
• When the alarm sounds, press the SNOOZE button to silence the alarm for 10 minutes. Zz will
show next to the Bell Icon.
Note:
The alarm will sound with increasing frequency for two minutes, then shut off completely if
not deactivated.
Page | 5
• Your clock will search for the WWVB Atomic Time Signal for 2 hours after batteries are installed.
• Press the SET button to start or stop a manual search for the WWVB Atomic Time Signal.
• The WWVB Tower Icon will flash when searching and be solid when signal is received.
• For information about WWVB Atomic Time visit:
Alarm Hour
Alarm OFF
Alarm ON
Alarm Minutes