
W85746-BHG www.lacrossetechnology.com/support
pg. 2
................................................................ 7
......................................................................................... 7
....................................................................... 7
.......................................................................................... 8
.......................................................................... 9
Warranty and Support Information
................................................... 9
..................................................................................... 10
Initial Setup
1.
Insert 2 new AA batteries (not included) into the TX141v2
sensor. Observe the correct polarity. The red LED will flash
when transmitting.
2.
Insert 2 new AA Alkaline batteries (not included) into
the clock. Observe correct polarity.
3.
After 5 minutes, place the sensor outside in a shaded
location. Maximum range is 300 feet (91 meters) open air.
Note: If the outdoor Temperature area shows dashes after 3
minutes, remove the batteries and start from step 1.