Page | 3
Wi-Fi Wind Station
1. Insert 2 - C batteries into your LTV-W1 Wind Sensor.
2. Insert 2 - AA batteries into your LTV-TH1 Thermo-Hygro Sensor.
3. 5 volt power cord (required) into V21-WTHv2 station
*3-AA batteries for optional backup of your time and date
4. Download the La Crosse View™ App (App Store or Google Play)
5. Follow along with our instructional videos to connect your station to the app:
http://bit.ly/LaCrosseView_Support_Vid_01_1
http://bit.ly/LaCrosseView_Support_Vid_01_2
4. Mount your sensors in appropriate locations.
*Battery operation only, station will not update sensor or Wi-Fi data. Power cord is required.
QUICK SETUP
THERMO-HYGRO
Keep out of direct sunlight & ensure the sensor is well-ventilated.
• We recommend mounting it on a north-facing wall under an eave or deck for best results.
WIND SPEED
Ensure the sensor is mounted vertically – an unobstructed rooftop is ideal.
• Your wind sensor should be the tallest object in the area to avoid educed wind speed values.
QUICK MOUNTING TIPS
BUTTON FUNCTIONS
Buttons located on top of your Wind Station
ALERTS
Hold to set alerts. Press to confirm setting and move to next alert.
WIND, TEMP
Press to view history.
+ or –
Use + or – to adjust values in settings. Hold to adjust quickly.
+ & –
Hold both buttons to search for Wi-Fi.
SET
Press to view Wi-Fi Status. Hold for basic settings.
SENSOR
Press to view sensor ID numbers, then hold PLUS (+) to search, or hold
MINUS (–) to remove.
LIGHT
Press to adjust brightness.
ALERTS & LIGHT
Hold both to Factory Reset Station.
All sensor ID’s, History, and Wi-Fi settings will be reset.
