Page | 13
S85807
Professional Weather Station
Each sensor has a unique ID and will be synced to the correct sensor location on the
weather station until manually deleted.
• If sensor loses connection to the weather station for any reason, the weather station
will show dashes after 30 minutes.
• The weather station will search for 5 minutes every hour to reconnect with sensor.
1. In normal mode press and release the SENSOR button to view individual sensor ID’s
for up to 15 seconds.
2. Press and release the + button to search for the sensor, who’s ID is shown.
Sensor Search
TH Sensor ID
Multi-sensor ID
TH Sensor Deleted
3. The strength signal icon will animate until the sensor signal is received, or for 3
minutes if no signal available.
Delete Sensor:
1. Press the SENSOR button to view
individual sensor ID.
2. Hold the
-
button for 5 seconds
to delete the sensor and ID.
Add or Replace Sensor:
1. Install batteries in sensor.
2. Press and release the SENSOR
button to view sensor area (dashes).
3. Press the + button to search.
4. Press the TX button on sensor.
5. When sensor connects, its ID and
readings will show on the display.
Back
to
Top
