La Crosse Technology, Ltd
Page 3
4.
SEARCH button
Normal time display:
•
Press to search for Atomic Time Signal
•
Hold to search for Outdoor Sensor.
Normal time mode:
•
Press to display Calendar or Moon Phase
6.
ALARM button
Normal Time Display-
•
Press to activate or deactivate alarm.
•
Hold 3 seconds to enter alarm settings mode.
Alarm Mode:
•
Press and release to confirm setting and move to next item or exit.
7.
SNOOZE button
Setting Mode-
•
Press to exit any setting menu (changes saved)
Alarm Mode-
•
Press to activate snooze feature for 10 minutes.
Outdoor Temperature Sensor
•
The TX141-B (all versions) Outdoor Sensor are compatible with this atomic clock.
Power Requirements
•
2-AA
power the Outdoor sensor.
•
3-AA
power the Clock.
•
We recommend Alkaline batteries for the Outdoor sensor.
Quick Connect
Explanation: Use the quick connect for an atomic clock and Outdoor sensor that have been working but lost
connection due to interference or low batteries. This is not the same as a thorough factory reset.
1.
Bring the Outdoor sensor and atomic clock together inside and place the units 5-10 feet apart with
nothing between them.
2.
Hold the SEARCH button for 5 seconds. The Outdoor temperature area will flash.
3.
Remove battery cover from the Outdoor sensor and press and release the TX button to send the
signal.
4.
Wait for 2 minutes for the Outdoor temperature to appear on the atomic clock.
•
If the above procedure does not work, please try the factory reset.
