8
2. Place the atomic wall clock onto the screw, using the hanging hole on the backside. Gently pull the atomic wall clock
down to lock the screw into place.
3. Choose a location 6 feet or more from electronics such as cordless phones, gaming systems, televisions,
microwaves, routers, etc.
4. Place within range of the outdoor transmitter.
5. The maximum transmitting range in open air is 200 feet (96 meters). Obstacles such as walls, windows,
stucco, concrete, and large metal objects can reduce the range.
6. For best WWVB reception, orientate the atomic wall clock with the front or the back facing Ft. Collins,
Colorado and mount on an exterior wall.
Position the Outdoor Transmitter
To achieve a true temperature reading, mount in a shaded location. While the outdoor temperature sensor is weather
resistant, avoid submersion in water or snow. We recommend that you mount the outdoor temperature sensor on an
outside North-facing wall. The transmission range is 200ft(open air). Obstacles such as walls, concrete, and large metal
objects can reduce the range. Place both units in desired location, and wait approximately 15 minutes before
permanently mounting to ensure that there is proper reception.
Wall Mount:
1. Remove the mounting bracket from the outdoor temperature sensor .
2. Place the mounting bracket in the desired shaded location (wall or table).
3. Through the screw holes of the bracket, mark the mounting surface with a pencil.
4. Screw mounting bracket onto the mounting surface. Ensure that the screws are flush with the
bracket. Do not over-tighten.
5. Insert the outdoor temperature sensor into the bracket.
Note:
Mounting with adhesive tape is not recommended as a permanent mounting solution. Only use adhesive tape
during set-up process.
Care and Maintenance
•
Do Not Mix Old and New Batteries
•
Do Not Mix Alkaline, Standard, Lithium or Rechargeable Batteries
•
Do not expose the atomic wall clock to extreme temperatures, vibration or shock.
•
Keep atomic wall clock dry.
•
Clean atomic wall clock with a soft damp cloth. Do not use solvents or scouring agents.
•
The product is not a toy. Keep it out of reach of children.
•
The product is not to be used for medical purpose or for public information, but is determined for home use only.
•
The specifications of this product may change without prior notice.
•
Improper use or unauthorized opening of housing will void the warranty.
•
If the unit does not work properly, change the batteries.
Specifications
Temperature measuring range
Indoor:
14.5
°
F to 138
°
F with 0.5
°
F resolution (-9.5
°
C to +59.9
°
C with 0.5
°
C resolution)
(“OF” displayed if outside this range)
Outdoor:
-39.8
°
F to 139.8
°
F with 0.2
°
F resolution (-39.9
°
C to 59.9
°
C with 0.1
°
C resolution)
(“OFL” displayed if outside this range)
Indoor humidity:
20% to 95% with 1% resolution
(“- -“ is displayed if outside the range)
(“19%” is displayed below 20%; "96%“will be displayed above 95%)
Temperature and humidity checking interval:
Indoor:
Every 8 or 16 seconds
Outdoor:
Every 4 seconds
Humidity:
Every 65 seconds
