La Crosse Technology, Ltd
Page 6
Do I need to unplug the clock to change the time?
•
No. To access the Program Menu, simply hold the button for 3 seconds. The
Greeting will not show. The Greeting will only show when clock is plugged in.
Time Alarms
There are 2 time alarms: LIGHT ALARM and SOUND ALARM. The LIGHT alarm and SOUND
alarm may be set to different times or be set to the same time.
The Light and Sound alarm can each be set to:
•
DAILY ALARM (1-7) – Alarms 7 days per week when active.
•
WEEKDAY M-F (1-5) – Alarms Monday through Friday only
•
WEEKEND S-S (6-7) -Alarms on Saturday and Sunday only.
Light Alarm (light only, no sound)
•
The Light Alarm is a silent alarm. There will be no Snooze feature for the Light Alarm.
•
When the user sets the light alarm for 7:00am, the light should start at 6:30am and
gradually increase to full brightness at 7:00am.
Set Light Alarm:
1.
Hold the button to enter the Alarm Setting Mode. DAILY ALARM will show.
Tap the + or – button to select Daily Alarm, Weekday M-F alarm, or Weekend S-S alarm.
2.
Press the button. The Alarm Hour will flash. Tap the + or – button to adjust the hour.
3.
Press the button. The Alarm Minutes will flash. Tap the + or – button to adjust the
minutes.
4.
Press the button to confirm and exit.
5.
The alarm is active when set.
Before the alarm time is reached, the Light Cycle will begin to brighten, taking 30
minutes for full brightness. Full brightness will remain until the alarm is turned off. In the
rare chance that the user activates the light alarm, when there is less than 30 minutes
before the set alarm time, the light brightness will go from the brightness it should be at for
the time remaining before the alarm.
Activate/Deactivate Light Alarm:
•
The alarm is active when set. The Light Alarm Icon and Alarm Type (1-5, 1-7, 6-7) will
show.
•
Press the button once to deactivate. Alarm Time and Type (DAILY ON/OFF) will
show for 3 seconds.
•
Press the button again to activate for the same time.