La Crosse Technology, Ltd.
Page 3
AM or FM Radio
AM Radio:
The highly integrated IC chip supports worldwide AM band reception from 520 to
1710 kHz using a digital low-IF architecture with a minimum number of external
components and no manual alignment required. This digital low-IF architecture
allows for high-precision filtering offering excellent selectivity and SNR with
minimum variation across the AM band.
1.
Fully extend the antenna
2.
With the radio ON, press the AM/FM/NOAA button to select FM radio.
3.
Press the TUNE button to increase or decrease the radio frequency.
4.
Hold the TUNE button to quickly search for the next available station.
FM Radio:
The FM receiver is based on the proven FM tuner. The receiver uses a digital low-IF
architecture allowing the elimination of external components and factory
adjustments. The IC chip integrates a low noise amplifier (LNA) supporting the
worldwide FM broadcast band (64 to 108 MHz).
1.
Fully extend the antenna
2.
With the radio ON, press the AM/FM/NOAA button to select FM radio.
3.
Press the TUNE button to increase or decrease the radio frequency.
4.
Hold the TUNE button to quickly search for the next available station.
Backlight-Blue or Red
This radio has a high visibility BLUE color backlight for normal viewing.
Backlight color changes to RED during a Weather Alert.
Red backlight will flash every 2 seconds for 5 minutes during a weather alert.
Blue backlight turns on for 10 seconds when any button is pressed.
White LED Light
Press the LIGHT button on the side of the radio to operate the very bright LED
flashlight.
The super bright LED flashlight is a full 1/2 watt
Optional Earphones (not included)
Plug in a set of 3.5mm earphones (not included) into the 3.5mm earphone jack
to privately listen to the radio
.
