La Crosse Technology, Ltd. www.lacrossetechnology.com/support
Page 2
5.
Insert the power cord into the wall outlet then into the clock.
Clock
Power Requirements
•
A 5-volt power cord powers this clock.
•
Optional CR2032 backup battery may be used to back up time and date.
Note: Backup battery will not run the clock display.
12/24-Hour Time Format
•
Use the program menu to select 12 hour or 24 hour time format..
Fahrenheit Temperature display.
•
This clock reads in Fahrenheit only.
Backlight HI-LO-OFF
•
Power cord: The backlight is on continuously when operating the clock with the 5-volt
Power cord.
•
Press the
button to dim the display or to brighten the display. (HI-LOW-OFF)
Backlight Auto Dim
1.
Hold the AUTO DIM SET button until OFF and the Auto Dim Icon shows. Press the + or
DST/- button to turn ON.
2.
Press the AUTO DIM SET button to select the Auto Dim Start Time (10:00pm will flash).
Press the + or DST/- button to adjust.
3.
Press the AUTO DIM SET button to select the Auto Dim Duration from 1Hr to 12Hr (8Hr
will flash). Press the + or DST/- button to adjust.
4.
Press the AUTO DIM SET button to confirm and exit.
When the Auto Dim Icon is displayed, your backlight will automatically dim at the start time
and brighten again at the stop time selected.
Manually Set Time/Date: Program Menu
1. Hold the SET button to enter the Settings Menu.
2. Use the + or DST/- button to adjust values.
3. Press the SET button to confirm and exit.
Settings Menu Order:
• Hours
• Minutes
