La Crosse Technology 513-1311OT, Часто задаваемые вопросы

Страница: 8 / 10

La Crosse Technology, Ltd Page 8
Set Time Alarm
Press and release the MODE/SET button to enter Alarm Mode. “
AL
” will show on the display.
ALARM TIME:
Hold the MODE/SET button to enter alarm time setting mode.

HOUR: The hour will flash. Press and release the + or - button to select the correct hour.
Confirm with the MODE/SET button and move to the minutes.

MINUTES: The minutes will flash. Press and release + or - button to select the correct
minutes. Press and release the MODE/SET button to confirm and exit.
Activate/Deactivate Time Alarm
ACTIVATE:

Press and release the ALARM ON/OFF button to activate the alarm. The alarm icon
appears when alarm is activated.
DEACTIVATE:

Press and release the ALARM ON/OFF button to deactivate the alarm. The alarm icon will
disappear when alarm is inactive.
Snooze Alarm

When the alarm sounds, press the SNOOZE button to trigger snooze alarm for 5 minutes.

The snooze icon Zz will flash above the time, when the snooze feature is active.

The SNOOZE button can be pressed up to seven times to repeat the snooze function.
Dashes, LL.L or Stuck Indoor Temperature

This is generally a power related issue.

Batteries may be overpowered or underpowered. Remove batteries from clock.

Press any button 20 times. Leave the clock unpowered for 1-2 hours.

Insert fresh alkaline batteries with correct polarity.

If the indoor Temperature is still dashes or OFL, the clock may need replacement.
Inaccurate Indoor Temperature Reading

Side-by-side test: Bring the outdoor sensor in the house and place it next to the clock for 2
hours.

Compare indoor and outdoor Temperature. The temperature should be within 4 degrees to
be within tolerance.

Look for heat sources such as sunlight, door or window frames, or reflected heat of cold.
Time is off by hours

Check to see if the WWVB Tower icon appears on the clock. If not, the clock has not
received a WWVB time signal in the past 24-hours.

Reposition the clock with the front or back facing Colorado.

Check that the Time Zone selected correctly reflects your location.

Check that the DST indicator is correct for your location (most areas observe DST so this
should be ON). Adjust the DST indicator in the Program Menu .

Large buildings, metal roofed buildings and buildings or rooms full of electrical and/or radio
equipment make it difficult to receive the WWVB time signal.