background image

La Crosse Technology, Ltd  

Page 2 

 

 

BATTERIES 

 

Explanation: Many problems are resolved with fresh batteries of the appropriate voltage. 

Many items sent in under warranty work when tested with fresh batteries. Batteries 

manufactured this year will have an expiration date 10 years (or more) in the future. 

Battery technology has improved and batteries will maintain voltage longer in storage. 

However, the environment the batteries reside in for the 10 years can deplete the power. 

 

 

We suggest a name-brand Alkaline battery.  

 

A minimum voltage of 1.48V is necessary for proper performance.   

 

Use a battery dated at least six years in advance of the current year. Batteries dated 

earlier than six years from now may still work, but may be unstable in performance.   

 

Good name-brand batteries make less noise, which reduces the chance of RF (radio 

frequency) interference from the battery compartment.  

 

BATTERY LIFE 

 

 

Battery life is over 12 months with one battery in the movement. 

 

Battery life can be up to 3 years with two additional batteries in the side compartments. 

 

ATOMIC CLOCK  FACTORY RESTART 

 

Explanation: The factory restart returns the atomic clock to an “out-of-the-box” state and 

often resolves an issue.  

  

Factory Restart: 

1.

 

Remove all batteries from the clock for 15 minutes.  

2.

 

Press the Manual Set Tab at least 20 times to clear all memory.  

3.

 

Insert fresh Alkaline battery into the clock.  

4.

 

The hands will spin to 12:00, 4:00 or 8:00 and wait for the WWVB time signal. 

 

SUPPORTED TIME ZONES 

 

 

This atomic clock offers 4 time zones: Pacific, Mountain, Central and Eastern. 

 

La Crosse Technology

®

 does not make an analog clock with more than four time 

zones.  

 

The atomic clock works in North America.  

 

Outside of North America, the atomic clock will not receive a WWVB signal, but will 

keep time like a quartz clock if manually set. 

 

TIME IS INCORRECT 

 

 

Indicative of non-receipt of WWVB signal 

 

Electrical storms between you and Colorado can interfere with the WWVB signal  

 

Replace battery and perform restart procedure. Allow up to 5 days to receive a signal. 

 

Reposition the atomic clock with the front or back facing Colorado. 

 

Try a different location, ideally near a window. The clock should be at least six feet from 

computers, TVs, air conditioners, other atomic clocks and other electrical appliances that 

cause interference. 

 

Large buildings, metal roofed buildings and buildings or rooms full of electrical and/or 

radio equipment make it difficult to receive the WWVB time signal. 

 

CLOCK IS INCORRECT BY HOURS BUT MINUTES ARE CORRECT 

Содержание 433-3256

Страница 1: ...ct 2 Clock is incorrect by Hours but minutes are correct 2 Daylight Saving Time 3 Manually Set Time 3 How long will the battery last 3 Can I shut off the WWVB signal 3 Is there a booster antenna to receive the WWVB signal in a difficult location 3 Can I wire a control timing circuit to the La Crosse Technology atomic clock 3 Why do the hands spin once or twice everyday 3 Hands spin non stop 4 Hand...

Страница 2: ...he box state and often resolves an issue Factory Restart 1 Remove all batteries from the clock for 15 minutes 2 Press the Manual Set Tab at least 20 times to clear all memory 3 Insert fresh Alkaline battery into the clock 4 The hands will spin to 12 00 4 00 or 8 00 and wait for the WWVB time signal SUPPORTED TIME ZONES This atomic clock offers 4 time zones Pacific Mountain Central and Eastern La C...

Страница 3: ...ter 15 minutes insert the battery and allow the clock to spin to 12 00 4 00 or 8 00 Hold the Manual Set Tab and the hand will spin Continue holding to reach the correct time Note You can only set the clock manually for about 2 minutes after inserting the battery If the clock receives the WWVB time signal this signal will override manually set time HOW LONG WILL THE BATTERY LAST A good AA Alkaline ...

Страница 4: ...f under warranty the clock must be sent in for repair or the movement needs to be replaced POSITION THE CLOCK This La Crosse Technology atomic clock is designed for indoor or outdoor use INDOOR Select a location to place the radio controlled clock where it will be at least six feet away from a TV computer air conditioner or other household electrical appliances The optimal location is near a windo...

Отзывы: