10” Atomic Wall Clock
Model: 404-1225
DC: 113016
Power up
On the back of the clock, select Time Zone and
Daylight Saving Time (DST) ON or OFF.
Insert 1 AA battery into the movement.
For best reception, place clock on a wall that faces
Ft. Collins, Colorado.
During the night, your clock will set itself.
4
3
2
1
For information about WWVB, atomic time signal visit:
http://bit.ly/AtomicTime
IMPORTANT:
• Hands will move to 12:00 and search for the
atomic time signal.
• If no time signal is received, after 8-10 minutes, the
clock will start running from 12:00.
• Clock will search for the atomic time signal again
after midnight, when signal is strongest.
• Allow up to 5 nights for the clock to receive the
atomic time signal.
• On the following page are instructions to manually
set your clock.
