La Crosse Technology, Ltd.
Page 4
HUMIDITY SHOWS DASHES BUT TEMPERATURE WORKS
•
The humidity low range is 10% RH. If your local humidity is below 10% you will see this reading.
•
Complete a restart with fresh batteries.
•
Replace the sensor.
FAHRENHEIT/CELSIUS
•
Enter the program menu to select in Fahrenheit (ºF) or Celsius (ºC).
HI | LO TEMPERATURE/HUMIDITY RECORDS
•
All HI/LO temperature/humidity records reset automatically at 12:00 (midnight).
•
From normal display, press and release the TEMP button to view indoor and outdoor HI/LO
temperature/humidity records and outdoor Heat Index and Dew Point.
o
Press once to view HI indoor and outdoor temperature/humidity records.
o
Press again to view LO indoor and outdoor temperature/humidity records.
o
Press again to view outdoor Heat Index.
o
Press again to view outdoor Dew Point.
SENSOR AREA IS BLANK (NO DASHES OR NUMBERS)
•
Check that other areas of the weather station read properly. There may be a problem with the weather
station.
ALERTS: TEMP, HUMIDITY
Set Alerts:
• Hold the ALERTS button to enter alert setting menu.
• Outdoor LO ALERT ON | OFF will flash.
Alert ON:
1. Press the + or - button to arm the alert. Press the ALERTS button to move to alert value.
2. When the alert is armed (ON) the alert value will flash
3. Press the + or - button to set the alert value (Hold to set quickly).
4. Press ALERTS button to move to next alert.
5. Press the SEARCH button at any time to exit.
Alert OFF:
1.
Alerts are OFF unless armed. If you do not wish to set an alert, simply press the ALERTS button again to
move to the next alert.
Alert Setting Order:
• Outdoor LOW Temperature
• Outdoor HIGH Temperature
• Outdoor LOW Humidity
• Outdoor HIGH Humidity
