La Crosse Technology, Ltd
Page 2
storage. However, the environment the batteries reside in for the 10 years can deplete
the power.
We suggest name brand Alkaline batteries for
indoor displays
.
A minimum voltage of 1.48V for each battery is necessary for proper performance.
Use batteries dated at least six years in advance of the current year. Batteries dated
earlier than six years from now may still work, but may be unstable in performance.
Good name brand batteries make less noise, which reduces the chance of RF (radio
frequency) interference from the battery compartment.
Digital Clock Factory Restart
Explanation:
The factory restart returns the clock and outdoor sensor to an “out-of-
the-box” default state and often resolves an issue.
Factory Restart:
1.
Remove all power from clock.
2.
Press one of the buttons on the clock at least 20 times to clear all memory.
3.
Verify that the clock is blank before proceeding (there may be lines painted on the
screen that will show when there is no power).
4.
Leave without power for 15 minutes
(very important).
5.
Insert fresh batteries into the clock.
Display Indoor Temperature or Seconds
Press the MODE button to toggle between indoor temperature, or seconds.
This is a normal feature of the clock.
Fahrenheit/Celsius
Use the
to switch from Fahrenheit to Celsius.
12-Hour Time Format
Use the
to switch from select 12-hour or 24-hour time format..
Supported Time Zones
This clock has 7 Time Zones:
AST
=Atlantic,
EST
= Eastern,
CST
= Central,
MST
= Mountain,
PST
= Pacific,
AKT
= Alaska,
HAT
=Hawaiian The digital clock
works in North America.
Outside of North America, the digital clock will not receive a WWVB signal, but will
keep time like a quartz clock.
Dashes, HHH, LLL or Stuck Indoor Temperature
