INSTALLATION
Check the appliance is electrically safe when you have finished.
21
Regulations
Installation of this range must conform with local
codes, or in the absence of local codes, with the
National Fuel Gas Code, ANSI Z223.1/NFPA.54, latest
edition.
In Canada, installation must conform with the
current Natural Gas Installation Code, CAN/
CGA-B149. 1 or the current Propane Installation
Code, CAN/CGA-B149.2, and with local codes where
applicable.
In Canada, electrical grounding must be in
accordance with the current CSA C22.1 Canadian
Electrical Code Part 1 and/or local codes. See
‘Electrical Connection’ in this section.
CSA 1.1, latest edition and CAN/CGA-22.2 latest edition.
This range becomes hot in use, the cooktop burners produce
exhaust gases.
IMPORTANT
Observe all governing codes and ordinances.
The range must be properly grounded.
This appliance is heavy. Ensure you have the correct
facilities to complete the move. To find the weight of
the appliance, refer to the "Technical data".
Refer to "Positioning the range".
Save these instructions for the local electrical
inspector’s use.
For your safety
DO NOT
store or use combustible materials, gasoline or other
flammable vapors and liquids in the vicinity of this or any
other appliance.
If you smell gas,
•
open windows.
• DO NOT
touch electrical switches.
•
Extinguish any open flame.
•
Immediately call your gas supplier.
Improper installation, adjustment, alteration,
service or maintenance can cause injury or property
damage. Refer to this manual. For assistance or
additional information, consult a qualified engineer.
NEVER reuse old flexible connectors. The use of old
flexible connectors can cause gas leaks and personal
injury. Always use NEW flexible connectors when
installing a gas appliance.
IMPORTANT!
•
Remove all packing material and literature from oven
before connecting gas and electrical supply to range.
•
Have your range installed by a qualified installer.
• DO NOT
install your range on a substrate that cannot
withstand 180 °F (82 °C).
• DO NOT
install your range directly onto carpeting.
Ensure an appropriate, non-combustible, substrate is
installed prior to installing the range.
•
Make sure the wall coverings around the range can
withstand heat generated by the range up to 200 °F
(93 °C).
•
There must be a gap of at least 30’’ (762 mm) between
the top of the range and any combustible surface above
it.
•
If a ventilating hood is installed above the range follow
the installation instructions supplied with the hood.
This type of ventilation system may cause ignition
and combustion problems with the gas cooking
appliance, resulting in personal injury or unintended
operation. Ventilating systems that direct the air
upwards can be used.
Items of interest to children should not be stored
above a range – children climbing on the range to
reach items could be seriously injured.
9. Installation safety instructions
Содержание C1LP
Страница 43: ...39 NOTE ...