L3Harris Narda SignalShark, Руководство пользователя

Страница: 95 / 231

Level Meter View
95
Setting the tuner frequency (Ftune)
Here you can do the following:
Setting the tuner frequency (Ftune)
You selected the desired view.
1. Tap the Ftune button.
2.
Enter the required value and select a unit.
The settings is accepted immediately and the input window is closed.
Switching on / off the automatic frequency control (AFC)
Tap the AFC button to switch it on or off.
Switching on / off Fcent <–> Ftune
Tap the Fcent <–> Ftune button to switch it on or off
Setting the step width (Fstep)
1. Tap the Fstep button.
2. Enter the step width and select a unit.
The settings are accepted immediately and the input window is closed.
Selecting a Transmitter Table (Transmitter Tab.)
1. Tap the Transmitter Table button.
2. Select a table from the dropdown window and confirm with OK .
For more information about how to create a transmitter table see Transmitter Tables .
Selecting the mode of the rotary wheel (Rotary Mode)
You can select following modes:
• Digit / Fstep: changes Ftune by digits or the selected Fstep
• Fast Tune: changes Ftune by rotating the wheel dynamically (rotating the wheel long and
fast accelerates the change)
• Transmitter: changes Ftune by selecting a transmitter from the transmitter table
1.
Tap the
Rotary Mode
button.
2. Select a mode from the dropdown window and close the window using the X button.